Upper and Lower Pads
The two raised cushion areas are designed to provide a softer contact point around the striker zone.
Magnetic Car Door Buffer Pads – Silicone Anti-Rattle Door Bumpers for Quieter Closing & Scratch Protection -Z
Magnetic Car Door Buffer Pads – Silicone Anti-Rattle Door Bumpers for Quieter Closing & Scratch Protection -Z
🔥
Special Deals
Available
68
Demo Live Visitors
Regular price
$24.97
Regular price
$24.97
Sale price
Unit price
per
BUNDLE & SAVE
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
Magnetic Car Door Buffer Pads – Silicone Anti-Rattle Door Bumpers for Quieter Closing & Scratch Protection -Z
Regular price
$24.97
Regular price
$24.97
Sale price
Unit price
per
A Better Door-Closing Experience
Less Door Rattle. More Cushioning.
Less Door Rattle. More Cushioning.
Add a magnetic buffer pad to a compatible metal door frame to help cushion contact around the door striker area.
- Magnetic attachment
- Soft cushioning contact
- Low-profile black design
- Four-piece set shown
Check frame compatibility and striker clearance before installation.
The Everyday Problem
Door Rattle Can Make Every Drive Less Comfortable.
On some vehicles, movement around the door and striker area can contribute to rattling, contact noise or visible wear.
A small cushioning accessory may help reduce direct contact in a compatible installation, without changing your everyday driving routine.
See How It Works
Cushioned Contact
Add a Buffer Where Contact Happens.
The pad places cushioning material near the door striker area, where suitable positioning may help soften contact between nearby surfaces.
The aim is to help reduce some rattling and contact noise while adding a protective layer around the installation area.
Noise can have several causes. This accessory is not a repair for loose hinges, damaged latches, worn seals or other mechanical problems.
Purposeful Details
01 / CUSHION
02 / CLEARANCE
03 / MOUNTING
Two Cushion Zones. One Open Striker Area.
The split design places cushioning above and below the central opening, leaving room for a compatible striker pin.
Central Opening
The open centre provides space for the compatible striker pin. Alignment and clearance are essential.
Magnetic Attachment
The illustrated design uses magnets to attach to a compatible metal door-frame surface.
Simple Setup
Clean. Position. Attach. Check.
The pictured installation uses a clean mounting surface and magnetic placement beside the door striker.
Take time to align the centre opening with the striker pin. The pad must not interfere with the latch or normal door closure.
Do not drive the vehicle until every door closes and latches normally. If the pad obstructs the striker, remove it.
Clean the Area
Wipe the intended metal mounting surface to remove dust and residue, then dry it thoroughly.
Align the Pad
Position the pad vertically beside the striker and check that the central opening aligns correctly.
Attach Magnetically
Allow the magnet to hold the pad against the compatible metal surface. Confirm it sits securely.
Check Door Operation
Close the door gently and confirm the striker engages normally without obstruction or unusual resistance.
Made for Everyday Use
A Compact Accessory for Your Door Frame.
The black, low-profile design sits beside the metal striker and keeps the cushioning material concentrated around the intended contact area.
The illustrated product set contains four buffer pads. Check the actual package contents and inspect the pads periodically for movement, wear or damage.
Product material descriptions and long-term durability should be confirmed against the seller's official specifications.
For Everyday Driving
A Small Addition to Your Daily Routine.
For compatible vehicles, the pad is intended to remain near the door striker during everyday opening and closing.
Check the fit after installation and periodically inspect the mounting position to make sure the pad has not shifted.
Check Compatibility Tips
Check Your Fit
Designed for Compatible Metal Door Frames.
The magnetic mounting approach is intended for compatible metal surfaces near the striker. Fit varies by vehicle, door-frame shape and striker position.
Compare the mounting area with the product design before installation. Do not place the pad where it could affect the latch, door seal or normal operation.
Good to Know
Frequently Asked Questions
Review these points before fitting the buffer pads to your vehicle.
The supplied images show a four-piece set. Confirm the actual package contents on the live product listing.
The illustrated design uses magnetic attachment to a compatible metal door-frame surface. It is not intended for non-magnetic surfaces unless the product instructions specifically say otherwise.
No universal fit can be guaranteed without a verified vehicle compatibility list. The frame must be compatible with magnetic attachment and provide suitable clearance around the striker.
The pictured product uses magnetic mounting, which generally allows removal from a compatible metal surface. Check the pad's condition and mounting stability before reuse.
Results vary by vehicle and the source of the noise. The pad may help cushion some contact, but it cannot guarantee silent closing or correct unrelated mechanical issues.
Confirm that the striker aligns with the centre opening, the door closes and latches normally, and the pad does not interfere with seals or other moving parts. Remove it if normal operation is affected.
A More Cushioned Contact Point
Help Make Every Door Close Feel More Refined.
Explore the magnetic buffer pad set for compatible vehicle door frames. Check fit and clearance before installation.
View Product Options
